← back to index
● Automation

n8n Pricing 2026: €20 Starter, €50 Pro, Free Self-Host

n8n Cloud costs €20 (2,500 runs) or €50 (10,000 runs) a month. Business is €667 and self-hosted only. What each plan covers and when self-hosting pays.

AH
Arthur HofFounder, Bunny Honey Club
publishedNov 15, 2026
read7 min
n8n Pricing 2026: €20 Starter, €50 Pro, Free Self-Host

n8n pricing in one line: Cloud costs €20 a month for 2,500 workflow executions or €50 for 10,000, billed annually. Business is €667 a month for 40,000 and only exists self-hosted. The Community edition has no license fee at all. Those are t

n8n pricing in one line: Cloud costs €20 a month for 2,500 workflow executions or €50 for 10,000, billed annually. Business is €667 a month for 40,000 and only exists self-hosted. The Community edition has no license fee at all.

Those are the numbers on n8n's own pricing page, which I opened today (November 15, 2026). The page showed euro prices when I loaded it. Third-party blogs quote these plans in dollars, pounds and rupees, and they disagree about the Business tier. This post sticks to what n8n prints.

€20Starter a month, billed annually, 2,500 executions
€50Pro a month, billed annually, 10,000 executions
€667Business a month, 40,000 executions, self-hosted only
86-89%of Pro's allowance eaten by one workflow that runs every 5 minutes

The n8n plans cost €20, €50 or €667 a month

Every n8n plan includes unlimited users, unlimited workflows and every integration. The only meter is how many times per month your workflows run. Here is the page, in one table.

PlanPrice (billed annually)Executions a monthWhere it runsNotable limits
Starter€20 a month2,500n8n Cloud1 shared project, 5 concurrent runs, forum support
Pro€50 a month10,000n8n Cloud3 shared projects, up to 50 concurrent runs, admin roles
Business€667 a month40,000Self-hosted only6 shared projects, SSO and LDAP, Git version control
EnterpriseContact salesCustomCloud or self-hostedSLA, external secret stores, 365 days of insights

The page says annual billing saves 17 percent. Pay monthly and the sticker prices go up. I could not read the monthly figures off the page, so I am not quoting them.

The comparison table further down the page adds limits that matter more than the headline price. Starter keeps 2,500 saved executions for 7 days and caps a single run at 5 minutes. Pro keeps 25,000 for 30 days and allows runs of 40 minutes. For both, the overage line reads "Capped". The page does not spell out what the cap is, so ask n8n before you plan around going over.

There is also a free trial on Cloud. No credit card, 1,000 executions, 5 concurrent runs and a 180-second timeout per run.

An execution is one whole run, however many steps it has

This is the part that decides whether n8n is cheap for you.

An execution is a single run of your entire workflow. It doesn't matter how many steps are in the workflow or how much data it processes.

— n8n pricing page, checked November 15, 2026

Compare that with Zapier's pricing page, which says every step in a Zap and every external connector call uses tasks. Zapier's free plan includes 100 tasks a month. Professional starts at $19.99 a month, and Team starts at $69 for up to 25 users. Zapier's own pricing explainer puts 750 tasks on the $19.99 tier, billed annually, and says filters, paths and the formatter step do not count. AI steps count for more: 3 tasks for an Advanced model and 5 for a Premium one.

Make's pricing page switched its billing unit to credits. Most actions cost 1 credit, the router costs none, and the free plan has 1,000 credits a month. Make blocked my script from reading its paid price table, so I am not putting a Make price in this post. A table with a guessed number in it is worse than no table.

Here is our own arithmetic, not a vendor claim. Say a lead-intake workflow has 8 steps, 7 of them actions, and runs 300 times a month.

  • n8n: 300 executions. That is 12 percent of Starter's 2,500.
  • Zapier: up to 2,100 tasks if all 7 actions count. That is nearly three times the 750 on the entry tier, so you would be buying a larger task tier.

Add a second and third workflow like it and the gap widens. A single-step "new row, send email" zap does not show this. A 12-step quote follow-up does.

One 5-minute schedule can swallow a whole Pro plan

n8n's pricing FAQ gives the usage math itself. A daily schedule is 30 or 31 executions a month. A schedule that runs every 5 minutes is about 8,600 to 8,900.

That one workflow uses 86 to 89 percent of Pro's 10,000. On Starter it is three and a half times the whole allowance. This is the most common way a small team ends up on the wrong plan.

The fix is usually architectural. Replace polling with a webhook where the source app supports one, so the workflow runs when something happens instead of every 5 minutes asking whether it did. Run the check every hour instead of every 5 minutes if a webhook is not available. That drops it from roughly 8,700 runs a month to roughly 720.

Per execution, Pro is the cheapest plan on the page: €0.005 a run against €0.008 on Starter (our division of the annual-billed price by the allowance). Business works out near €0.017, because you are paying for SSO, environments and Git control, not for runs.

Self-hosting n8n has no license fee and still costs money

The Community edition is the free one. The n8n license FAQ says it applies to the self-hosted version and is free for internal business use. Cloud has its own terms.

What you give up is spelled out in n8n's edition comparison. Community lacks projects, workflow and credential sharing, SSO, Git version control, environments and external secrets. Without sharing, only the instance owner and the person who created a workflow can see it. For one owner running a business that is fine. For a team of five who all need to edit the same workflow, it is not.

You can register the Community edition for free to get a license key that turns on folders, debug in editor and custom execution data. That is still $0.

Then there is the server. n8n recommends PostgreSQL and a 64-bit Linux host for production, and from version 3.0 it requires a Docker-based deployment, per its production requirements. As one price point, Hetzner's cloud page listed its CX23 at €5.99 a month excluding VAT today, though the page marked that model unavailable when I looked. Treat it as an order of magnitude: single digits a month for the box.

The box is not the cost. The cost is the Tuesday your workflows stop and nobody knows how to restore the database. Our rule: if nobody on your team can restore a backup, do not self-host. The €50 Pro plan is cheaper than one afternoon of that.

The Business plan is the odd one out

Business is where n8n's pricing stops making intuitive sense. It costs €667 a month billed annually, which is €8,004 a year. It includes 40,000 executions and is, per the pricing page, "self-hosted only". You cannot buy it on Cloud.

It is aimed at companies under 100 employees that need SSO, multiple environments and Git. If you do not need those, jump from Pro straight to self-hosting Community and skip Business.

There is a discount for small teams. n8n's Startup plan gives 50 percent off Business to companies with fewer than 20 employees. That is roughly €334 a month by our math. The page says to check if you qualify, so qualify first.

Which plan fits which business

Pick by workflow count and run pattern, not by headcount.

  • One owner, a few automations, under 2,500 runs a month: Starter. Make sure nothing polls every 5 minutes.
  • A small team in production, up to 10,000 runs: Pro. Admin roles and 3 shared projects are the reason to leave Starter, along with the longer 40-minute run limit.
  • Someone on staff who is comfortable with Docker and Postgres: Community self-hosted. Budget for the server and the time.
  • You need SSO or environments: Business or Enterprise, self-hosted. Ask about the Startup discount.
  • You would rather not run any of it: have someone build and run it for you.

Which tool you pick matters less than which jobs you automate. We wrote about what a small business should automate first, and the answer is rarely the workflow with the most steps. It is the one a person repeats every day. If one seat is hitting a usage wall in a chat assistant, that is the same signal, and our ChatGPT Business pricing breakdown covers when to buy the bigger plan and when to wire the task up instead. If you are weighing n8n against a Claude agent for the same job, read when each one wins.

Hiring the build changes what the real cost is

Everything above is about the meter. The real cost of automation is the build and the babysitting.

Take the pipeline after a quote goes out. A signed contract triggers onboarding, the CRM updates, and the scheduler follows. We described that for trades in our quoting software comparison and for agencies in the Stripe and n8n onboarding build. Neither needs a big plan. Both need someone to design the error handling, so a failed run pings a human instead of silently dropping a lead.

If you want that done and running, our automation service is the done-for-you version. We choose the n8n plan, build the workflows, and keep them running. You get the outcome and the executions are our problem.

● FAQ

How much does n8n cost per month?
On n8n's own pricing page, checked November 15, 2026, Cloud Starter is €20 a month billed annually for 2,500 workflow executions and Pro is €50 for 10,000. Business is €667 for 40,000 and only runs self-hosted. Self-hosting the Community edition has no license fee.
Is n8n really free?
The self-hosted Community edition is free to run, under n8n's Sustainable Use License. You still pay for the server and for whoever keeps it patched and backed up. n8n Cloud is always a paid subscription after the trial.
What counts as an n8n execution?
One run of a whole workflow. n8n says it makes no difference how many steps the workflow has or how much data it moves. That is the main difference from Zapier tasks, which count action steps.
Is n8n cheaper than Zapier?
For workflows with many steps, usually yes, because n8n bills a 10-step run as one execution and Zapier bills the actions inside it. For a two-step zap that fires a few times a week, the free tiers of both are enough and price is not the question.
Can I use self-hosted n8n to build automations for clients?
Yes, as long as your clients cannot create or edit workflows themselves. n8n's license FAQ says you may charge clients for workflow creation, setup, maintenance and training. Hosting n8n as a service where clients build their own workflows is not allowed.
— share
— keep reading

Three more from the log.

Get your free prototype